Industry News

The DC isolation switch is mainly used for indoor devices with AC 50/60Hz, rated voltage of 1500V, maximum voltage of 1000V, and rated current of 200A and 400A. In addition to switching power supply, DC isolating switches can also be used for infrequent on and off circuits.

Sensors and monitoring display modules can be configured as required to measure and monitor the current of each channel, and the running status can be recorded and displayed remotely without going to the site (optional);

Lightning discharge may occur between or within clouds, or between clouds to the ground. In addition, the internal surge caused by the use of many large capacity electrical equipment, the impact on the power supply system...

On August 14th, the Bosnia and Herzegovina National Radio reported that Bosnia and Herzegovina Power and the European Bank for Reconstruction and Development (EBRD) signed a loan agreement for the construction of the Gra č anica 1 and 2 photovoltaic power station projects.

According to a report on August 5th, the Alternative Energy Development Department of Thailand stated that the government will guide 800 state-owned institutions nationwide to save at least 20% of energy. The Metropolitan Electricity Authority (MEA) and the Provincial Electricity Authority (PEA) wil......

Indonesia announced on Monday (August 12th) that it has reduced the minimum local investment requirement for solar power plants from around 40% to 20%, in an effort to attract at least half of the funding from foreign multilateral or bilateral lending institutions for project investment.